windows xp boot disk non system disk or disk error

To make your boot disk part of a RAID, press Ctrl-I when promptedĭuring the boot process to enter the Intel Matrix Storage Manager option ROM If you are planning to make your boot disk part of a RAID, proceed To install your operating system (see Chapter 4, Installing Windows Vista Ultimate, Chapter 5, Installing Windows Server 2008, or Chapter 6, Installing Windows XP. If you are not planning to make your boot disk part of RAID, proceed

Press F10 to save your changes, exit the BIOS Utility, and reboot In the SATA Options menu, select one of the following:ĪHCI for a system using SATA disks (non-RAID). In the IDE Configuration menu, select Configure SATA In the BIOS Utility dialog, select Advanced -> IDE Configuration. Press the F2 key at the Sun logo screen to enter the BIOS Setup To Set the System BIOS and Configure Your Disks for For systems with SATA disks, performing this task is required for You must configure the SATA disks for AHCI or Intel RAID before installing When using the workstation's Intel AHCI integrated disk controller, If your PC will not enter setup using those keys and/or does not display the message described above when first turned on, you will need to refer to your documentation or contact your PC manufacturer for support.Setting the System BIOS and Configuring Disks for On most PCs this is the DEL key, the F1 key or the F2 key. To enter your BIOS, turn on the PC and hold down, or press repeatedly, the key required to enter setup. You're allowed only a few moments to press the required key before your operating system starts to load.

Most PCs briefly display a message describing how you can enter 'setup,' the program where BIOS settings are adjusted. Typically this is a menu system accessed by pressing a certain key on the keyboard when the PC starts. In modern computer systems, the BIOS chip's contents can be rewritten allowing BIOS software to be upgraded.Ī BIOS will also have a user interface (or UI for short). The BIOS software is specifically designed to work with the particular type of system in question, including having a knowledge of the workings of various devices that make up the complementary chipset of the system. This process is known as booting, or booting up, which is short for bootstrapping.īIOS software is stored on a non-volatile ROM chip built into the system on the mother board. The BIOS then locates software held on a peripheral device (designated as a 'boot device'), such as a hard disk or a CD, and loads and executes that software, giving it control of the PC. When the PC starts up, the first job for the BIOS is to initialize and identify system devices such as the video display card, keyboard and mouse, hard disk, CD/DVD drive and other hardware. The BIOS software is built into the PC, and is the first code run by a PC when powered on ('boot firmware'). In IBM PC Compatible computers, the Basic Input/ Output System (BIOS) is a de facto standard defining a firmware interface.

Windows xp boot disk non system disk or disk error